Publicidad
Idiomas disponibles
Idiomas disponibles
button. The left control lever has a START/STOP
button.
The control levers must be moved out to the park
position (A) to start the product. The control levers
can be moved forward and rearward from the neutral
To operate the product on page
position (B). Refer to
17 .
A
PTO (Power Take-Off) button and LED
indicator
The PTO button (A) is on the right control lever. The
PTO button engages and disengages the PTO clutch
and the cutting deck. The correct start conditions
must be obeyed to engage the drive of the blades.
Operation conditions on page 11 for the
Refer to
correct start conditions.
B
A
•
Push and hold the PTO button for approximately
1–2 seconds to engage the drive to the blades. A
PTO symbol on the display shows that the drive
to the blades is engaged.
•
Push and hold the PTO button for approximately
1–2 seconds again to disengage the drive to the
blades.
The LED indicator (B) adjacent to the PTO button
shows the PTO status.
LED indica-
Description
tor
The drive to the blades is engaged,
Solid white
no errors.
When you push the PTO button:
The drive to the blades cannot be
engaged because the operator is
not in the seat.
Flashes yel-
low
During operation: The drive to
the blades will soon disengage be-
cause the operator is not in the
seat.
1922 - 006 - 13.12.2022
LED indica-
tor
Flashes red
Solid red
B
Engine START/STOP button and LED
indicator
The engine START/STOP button (A) is on the left
control lever.
Note:
button on the control panel. Refer to
overview on page 4 . The 2 engine START/STOP
buttons have the same function.
The engine START/STOP button starts and stops
the engine. The correct start conditions must be
obeyed to start the engine. Refer to
conditions on page 11 for the correct start
conditions.
The LED indicator (B) adjacent to the engine
START/STOP button on the left control lever gives
information about the engine operation.
LED indica-
tor
Solid white
Flashes yel-
low
Flashes
white
Flashes red
Solid red
Description
The drive to the blades is disengag-
ed because the operator is not in
the seat.
The PTO function is defective.
Servicing is necessary.
There is also an engine START/STOP
Description
The engine is on, no errors.
The engine cannot start. The park-
ing brake is not engaged, the con-
trol levers are in an incorrect posi-
tion or the key switch is in locked
position.
All operation conditions are obeyed.
Start of the engine is possible.
The engine stopped because the
parking brake is not engaged and
the operator is not in the seat.
The engine is defective. Servicing is
necessary.
Control panel
Operation
B
A
5
Publicidad
