Descargar Imprimir esta página

Husqvarna Xcite Z350 Manual De Usuario página 20

Publicidad

Idiomas disponibles

Idiomas disponibles

Maintenance
Replace the foam pre-filter
4
(if equipped).
Clean the paper filter car-
5
tridge.
Examine the muffler and
spark arrester screen.
Start the engine and blades
and listen for unusual
sounds.
6
Sharpen the blades.
Replace the blades.
Replace the spark plugs.
Replace the engine oil.
Replace the engine oil filter.
Replace the fuel filter.
Replace the paper air fil-
8
ter.
Servicing interval
When the product is at a servicing interval, the
servicing symbol (A) shows on the display. The
servicing symbol stays on the display until the
servicing timer is reset.
To reset the servicing timer
1. Push the OK button on the control panel to open
the menu structure.
4
In conditions with dust, cleaning and replacement must be done more frequently.
5
In conditions with dust, cleaning and replacement must be done more frequently.
6
Must be done by approved service agent.
7
Replace the engine oil after the first 8-10 hours of operation. During heavy load or high ambient
temperatures, replace the engine oil each 50 hours.
8
In conditions with dust, cleaning and replacement must be done more frequently.
20
Daily maintenance
Before
7
Do maintenance at
a minimum of 1
After
time each year
O
O
*
*
X
X
O
O
O
O
O
2. Push the down button on the control panel until
the information symbol is selected.
A
3. Push the OK button. The display shows the hour
meter.
Maintenance interval in hours
25
100
O
O
*
X
X
X
X
O
O
O
O
O
1922 - 006 - 13.12.2022
500
O
*
X
X
O
O
O
O
O

Publicidad

loading

Este manual también es adecuado para:

Xcite z380