Publicidad
Idiomas disponibles
Idiomas disponibles
Problem
The transaxle leaks oil.
The cutting result is unsatisfactory.
Caution messages on the display
Symbol
Name
Operator presence control
(OPC) indicator
Slope indicator
Parking brake indicator
Key switch indicator
Control lever indicator
Control lever indicator
Control lever indicator
28
Cause
The seals, housing or gaskets are damaged.
There is air in the hydraulic system.
The tire pressure is different on the right and left sides. Refer to
Tire pressure on page 23 .
The blades are damaged.
The suspension of the cutting deck is not level.
The blades are blunt. Refer to
24 .
The product is operated at too high forward or rearward speed.
To get a good cutting result on page 18 .
Refer to
The grass is long. Refer to
There is grass blockage in the cutting deck. Refer to
the product on page 21 .
Cause
The product stops because the operator is not in the seat
and the parking brake is not engaged.
The product is operated on a slope >10°. Refer to
instructions for operation on slopes on page 10 .
The parking brake is engaged.
The product cannot start if the key switch is in locked posi-
tion.
The product stops if the key switch is moved from unlocked
to locked position.
The control levers are in the park position.
One of the control levers is not in the neutral position.
The control levers are in the neutral position.
To examine the blades on page
Symbols on the product on page 6 .
1922 - 006 - 13.12.2022
To clean
Safety
Publicidad
