Publicidad
Idiomas disponibles
Idiomas disponibles
Operator Presence Control (OPC)
The OPC engages when the operator lifts from the
seat. The engine and the drive to the blades stop if
the blades are engaged or the parking brake is not
Operation conditions on page 11 .
applied. Refer to
Throttle control
The throttle control adjusts the speed of the engine
and the speed of the blades if the blades are
engaged. The throttle control has 2 end positions,
idle speed and full throttle.
A
•
Idle speed (A) - decreases the engine speed.
•
Full throttle (B) - increases the engine speed.
CAUTION:
engine at idle speed (A) for longer time
than necessary. Too much operation
time at idle speed can decrease the life
of the spark plugs.
Fuses
The location of the fuses is in the fuse box. The
fuse box is below the seat. Remove the battery
compartment cover to get access to the fuse box.
Refer to the decal on the fuse box for identification of
the different fuses.
Hour meter
The product has an hour meter that shows how
many hours the engine has operated. The hour
meter is selected on the control panel display.
To read the hour meter
1. Push the OK button on the control panel to open
the menu structure.
2. Push the down button on the control panel until
the information symbol is selected.
3. Push the OK button. The display shows how
many hours that the engine has been in
operation.
4. To go back to the menu, push the down button 2
times and then push the OK button.
Symbols on the product
WARNING: This product can be
dangerous and cause serious injury or
death to the operator or others. Be
careful and use the product correctly.
6
B
Do not operate the
Read the operator's manual carefully
and make sure that you understand the
instructions before you use the product.
Stop the engine and remove the key
before you do maintenance.
Keep a safe distance from the product.
Do not operate the product on slopes
larger than 10°.
Do not park the product on slopes.
Do not keep passengers.
Look out for ejecting objects and
ricochets.
Keep hands and feet away from the
cutting deck.
Keep hands away from rotating parts.
Look out for persons and animals when
you operate the product forward.
Look out for persons and animals when
you operate the product rearward.
Do not sit on the accessory rack.
1922 - 006 - 13.12.2022
Publicidad
