Topmatic PKM-1800.1BG Manual De Instrucciones página 27

must be perfectly sealed.
8. Close the lid with the measure cup (Fig. 4, No. 1a). Observe the
recesses on the inner side of the lid. Turn the measure cup clockwise to
tighten.
9. Put the mixing jar on the drive shaft vertically without moving it. Do
the same by removing the mixer. Incorrect assembly will prevent blender
from operation.
10. Connect the mains cable to a properly installed and earthed 220 –
240V~ 50/60Hz outlet.
11. Speed Control Adjustment Application
- Speed "3-4" for easy mixing of liquids
- Speed "5-6" for firmer consistency - for mixing liquids and solid foods
- "P" for ice-crushing or for short, strong but durable pulses in "P" . You
must hold the control knob at "P" or press it repeatedly in the "P" setting.
3.3 Application instruction for blender
3.3.1 WARNING: The blade in the blender is sharp!
1. Never reach with your hands into the assembled mixing jar!
2. Handle it with great care! Risk of injury, especially when removing the
blade from the mixing container, or emptying and cleaning the mixing jar
3. Do not pour liquid ingredients hotter than 60°C into the mixing
container!
Danger of burns!
3.3.2 WARNING: Risk of injury!!
1. The drive shaft of the kneading machine starts turning, when the
appliance is switched on. Do not touch the rotating drive shaft during
operation!
2. For your own safety always attach the mixing bowl.