Vaisala Indigo300 Guía Rápida página 17

Connecting probes
CAUTION!
Attempting to connect incompatible devices or cables can damage the
equipment. Refer to transmitter specifications for compatibility information.
Figure 8 Connecting probes to Indigo300 transmitter
1 Probes are locked in place with the locking wheel. Never turn from the probe body.
2 Connect probe cables in the same way as probes: insert the cable in the connector and
hold in place while turning the locking wheel.
3 Insert probes into the probe connector with the orientation mark and/or the Vaisala logo
facing out.
1. Insert the probe into the probe connector with the orientation mark and/or the Vaisala
logo on the probe body facing out. Note the orientation of the cable connector pins when
inserting.
2. Hold the probe in the probe connector and lock it in place by turning the locking wheel
counterclockwise.
Only connect compatible measurement devices to the transmitter.
1
OPEN >>
3
2
OPEN >>
17