Vaisala Indigo300 Guía Rápida página 19

1. Open the protective cover of the transmitter service port using the 4-mm Allen key.
2. Connect the M8 connector of the service cable to the service port.
3. Connect the USB adapter to the M12 connector of the M12 - M8 service cable (262195).
4. Connect the USB adapter to a free USB port on the PC.
5. Open the Insight software on your PC.
6. Wait for the Insight software to detect the transmitter.
If Insight cannot detect the transmitter, make sure that the Vaisala USB Device
driver has been installed. Download and install the driver software from
www.vaisala.com/insight.
For more information on using Insight with the transmitter, see
(M212849EN).
http://
Indigo300 User Guide
19