Vaisala Indigo300 Guía Rápida página 21

1. Open the protective cover of the transmitter service port using the 4-mm Allen key.
2. Connect the M8 end of the service cable to the service port.
3. Connect the M12 end of the cable to the desired port on the bottom of the indicator. You
can select the port freely based on your set of connected devices.
• Note the orientation of the cable connector when inserting it
• Hold the connector in place while turning its locking ring clockwise –
never twist the connector body!
4. Wait for the indicator to detect the transmitter.
When the indicator recognizes the connected transmitter, it shows a notification on the
display. On the transmitter display, the active connection symbol
For more information on using the indicator with the transmitter, see
(M212849EN).
appears.
Indigo300 User Guide
21