Publicidad
Idiomas disponibles
Idiomas disponibles
Transmitter parts
1
2
3
4
5
6
Figure 2 Indigo300 transmitter parts
1
Display
2
Push button for transmitter display navigation
3
LED status indicator. Lights up when the display is turned off.
4
Locking wheel with a connector for probe or probe cable. Alternatively, this lead-through
can be ordered with a fixed cable and M16×1.5 cable gland pre-installed.
5
Lead-through for cables. Plugged, or equipped with a M16×1.5 cable gland or conduit
fitting NPT 1/2".
6
Lead-through for cables. Plugged, or equipped with a M20×1.5 cable gland or conduit
fitting NPT 1/2".
7
Grounding terminal
8
Service port for connection to Insight PC software or Indigo80 handheld indicator
9
Rubber lead-through for cables, at the backside
10
Transmitter base: mounting base and screw terminals for cables
11
Top cover: display and circuit board
The lead-through options (locking wheel, cable glands, conduit fittings, and plugs) are
selected when ordering the transmitter.
6
7
8
11
10
9
M212848EN-B
Publicidad
