Descargar Imprimir esta página

Westinghouse iGenTent Manual Del Usuario página 17

Publicidad

Idiomas disponibles

Idiomas disponibles

ASSEMBLY
g. Flip the over-flap down and over the Electrical Panel Apron. This will
ensure water runs over the front of the apron, keeping the electrical
outlets dry.
WARNING
ator exhaust muffler. Install GenTent Electrical Panel Apron such that
it cannot block exhaust in any way.
Refueling Door
The GenTent refueling door is designed to allow you to easily refuel your
generator without removing the GenTent. After use, the refueling door must
be wrapped around the side and pressed firmly back in place. Failure to
reseal the door may allow water to seep into the canopy. (Fig. 4.4)
Proper door sealing technique:
- Align the hook and loop at the bottom of the refueling door and press in
place.
- Press the refueling door around the Canopy and slide your hands to the
bottom while applying pressure to seal the door.
Fig. 4.3
GenTent Canopy must be installed above gener-
Fig. 4.4
English
|
17

Publicidad

loading