Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT OPERATING NOTES
Please review these important operating notes:
NOTE: GenTent Inverter kit is suitable for fully encased inverter generators
with perimeters up to 124".
NOTE: Should generator handle cause significant stretching of the elastic
straps when extended, release the elastics straps on the handle side of
the generator before deploying generator handles. Once the generator is
in the desired position, lower the handle, and refasten the elastic straps.
NOTE: The bottom trim of the canopy should align at or slightly below
the top of the generator. This will prevent pooling water on the fuel tank
and potential drippage toward the outlets. The electrical apron will cover
down to the top of the clamp which should be positioned below the lowest
electrical outlet.
NOTE: Should GenTent cover block pull starter, it is advisable to release
the elastic straps on the pull starter side and temporarily move the GenTent
canopy out of the way.
NOTE: When using GenTent during snowstorms, it is recommended to
periodically brush away any accumulation that blocks the top vent.
|
4
English
Publicidad
