Publicidad
Technical Information
Label
General Settings
Info
Communication mode
174
Connected pump can be identified by a label shown in the
"Headline bar" (Max 10 characters)
Pressure unit measurements can be selected (Torr, mbar, Pa)
Auto Start Enable: after power shut-down the HV is restored
automatically when option is selected.
Log Enable: this option enables the data log acquisition via
USB key of the ion pump main parameters (Voltage, Current,
Pressure) with a sampling time acquisition of 1 second.
The following communication mode can be selected:
Serial (RS232/RS485)
Remote
Local (through the front panel – Factory set)
LAN (optional)
Agilent IPCMini Ion Pump Controller User Manual
General factory information of the
controller: Part Number, Serial number,
Firmware version, CRC. Firmware
upgrade option is available through the
manual. Please contact
VPT-customercare@agilent.com
for more details and guideline.
Publicidad
