Publicidad
PASS THROUGH CONNECTION FOR XBOX |
RACCORDEMENT DE PASSAGE POUR XBOX
Use the Pass-Through cable to achieve Xbox compatibility via the VelocityOne Flight system.
1. Start with the VelocityOne Flight* connected to an Xbox console and set to Xbox Input Mode.
2. Remove the existing USB-C to USB-C cable from the Yoke and throttle quadrant.
3. Connect the pass-through cable to match the corresponding port colours as shown.
4. Push and hold the Mode button on the pedals for three seconds, then release. The status LED will turn blue.
5. On the VelocityOne Flight FMD, navigate to the Accessories menu and enable the Rudder Pedals.
*VelocityOne Flight must be running the latest firmware to enable compatibility.
Publicidad
