Grundfos SL1 Serie Instrucciones De Seguridad página 34

Declaration of performance
GB: UK Declaration of performance
UK declaration of performance in accordance
with The Construction Products Regulation 2019
1. Unique identification code of the product type:
• EN12050-1, EN12050-2 (SL1.50)
2. Type, batch or serial number or any other element
allowing identification of the construction product:
• SL1, SLV marked with EN 12050-1 or EN 12050-2 on
the nameplate.
3. Intended use or uses of the construction product, in
accordance with the applicable harmonised technical
specification, as foreseen by the manufacturer:
• SL1, SLV for pumping of wastewater containing
faecal matter marked with EN 12050-1 on the
nameplate.
• SL1.50 for pumping of faecal-free wastewater marked
with EN 12050-2 on the nameplate.
4. Name, registered trade name or registered trade mark
and contact address of the manufacturer:
• Grundfos Holding A/S
Poul Due Jensens Vej 7
8850 Bjerringbro
Denmark.
5. NOT RELEVANT.
6. System or systems of assessment and verification of
constancy of performance of the construction product:
• System 3.
7. In case of the declaration of performance concerning a
construction product covered by a harmonised standard:
• TÜV Rheinland LGA Products GmbH, notified
number: 0197.
Performed test according to EN 12050-1 or EN
12050-2 under system 3.
(description of the third-party tasks as set out in
Annex V)
• TÜV Rheinland LGA Products GmbH
Certificate number: 60139390 (EN 12050-1);
60139391 (EN 12050-2).
Type-tested and monitored.
8. NOT RELEVANT.
9. Declared performance:
The products covered by this declaration of performance
are in compliance with the essential characteristics and
the performance requirements as described in the
following:
• Standards used: EN 12050-1:2015-05 or EN
12050-2:2015-05 (SL1.50).
10 The performance of the product identified in points 1 and
. 2 is in conformity with the declared performance in point
9.
573