Auping Spiraalbodem 1M Manual De Instrucciones página 14

1. Introduction
This user manual contains important
information. We therefore suggest
that you keep it stored in a safe place.
EN
We congratulate you on having chosen
a mesh base that fulfills all your
2
personal requirements.
bases have
adjustability, according to type. The
mattresses vary in terms of the use of
materials and functions.
Thanks to their open structure, mesh
bases offer good ventilation, resulting
in a fresh and hygienic sleeping
environment.
All Auping mattresses can be used on
non-adjustable or adjustable mesh
bases. The
comfort zones which result in individual
adaptation to the weight distribution of
your body. The shoulder zone is slightly
softer, while the seat section in contrast
contains extra reinforcement. This
manner of zoning provides additional
comfort and improved support, both
when sitting and lying on the mattress.
Mattress connectors are used to attach
the mattress to the mesh base. This
prevents the mattress from sliding
downward while adjusting the bed, at
the same
effortlessly follows the movements of
the mesh base. The mattresses are
asymmetrically
materials, and therefore need not be
turned over.
The
varying degrees
mattresses comprise
time ensuring that
built using various
1.1 Technical specifications
Control box:
- Input 230 V AC, 50Hz
(or 220/240/110 V AC, 50/60 Hz
depending on the modell).
mesh
of
Drive motor:
- Leg and back motor: 24 V DC
Maximum continuous operating time 2
minutes per 20 minutes (2 minutes on,
18 minutes off).
Wireless remote control
- 3 Volt wireless handset;
- 2 LR03 batteries.
Weight (size 90x200 cm)
- mesh base 1M: 32 kg
1.2 Structure of the mesh base
1. Electrically adjustable back section
2. Manually adjustable foot end
3. Handset
it