Publicidad
Idiomas disponibles
Idiomas disponibles
Nothing works
Wrong motor engages
EN
Nothing works
10
Nothing works
Bed is not responding to
the wireless remote
control
Bed is not responding to
the wireless remote
control
Cause
The plug is not in the
socket.
Wrongly installed.
No main power supply.
Operating box defect.
Remote control and
control unit are not linked.
The child lock on the
remote control is turned
on.
Search
Check if the current is
switched on at the mains
power supply, or whether
another appliance has
caused a short circuit.
Solution
Put the plug into the
socket.
Install according to fitting
chart.
Throw earth leakage
circuit breaker if
necessary.
Replace.
To link the remote control
and the control unit, see
paragraph 4.6.
To turn off the child lock
on the remote control,
see paragraph 4.4.
Publicidad
