Auping Spiraalbodem 1M Manual De Instrucciones página 17

3. Preparing for use
3.1 Components of your mesh base
Your supplier will install your mesh base
for you. The drive motors should be
fitted by Auping specialists only.
For other parts and detailed installa tion
instructions, we refer you to the
installation cards included with the
various parts.
3.2 Position of the legs
It is vitally important that the feet be
fitted properly,
appropriate distribution of weight. This
means that the legs must be placed at
the distances from head and foot end
of the bed as indicated in the following
illustration (bed seen from above):
Length 190/200 cm: H 20 cm
Length 210/220 cm: H 30 cm
to ensure the
Head (H)
Foot (F)
F 20 cm
F 30 cm
3.3 Attachment of the handset
In order to easily
attach the handset
to Auping Auronde,
Match or Essential.
• Place the clamp on
the underside of the
side panel of the
surround (see fig. 1).
• Click the handset into
the clamp.
3.4 Fitting the Auping mattress
• Put your bed in the horizontal position.
• Put the mattress on the mesh base
and centre it.
3.5 Preparing for use
• Check that the mesh base can move
freely. Only adjust the mesh base
while it is in a horizontal position,
securely fixed to the supporting legs,
or to the supports provided within the
bed surround.
• Check that the mattress is attached to
the mesh base properly.
• Insert the plug into the wall socket.
• Turning off the child lock on the
remote control. See paragraph 4.4.
EN
5
fig. 1