Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Nature mode
Press the button with the three horizontal stripes ("mode" button) once to activate this mode.
The fan will automatically make the speed oscillate from fast to slow. The corresponding LED
light on the front of the fan will illuminate.
Sleep mode
Press the mode button again to activate this mode. This function will make the speed of the fan
from fast to slow. The corresponding LED light on the front of the fan will illuminate.
Normal mode
Press the "mode" button a third time to switch off both modes.
Remote control
The remote control requires 2 AAA batteries (not included) to be operative. To install the
batteries, simply depress the battery cover of the remote control with your thumb and remove
it. Insert the batteries according to the indications shown inside. Put the cover back.
Keep batteries and/or accumulators out of reach of children and animals. These could be
harmful if swallowed. If swallowed, consult a doctor immediately.
In case of detecting any damages, cracks or flaws, avoid operating it and touch your skin, eyes
and mucous membranes. In case the battery's fluid touches anyone's eyes, immediately flush
the affected areas with plenty of water. Consult a doctor immediately.
Display
1. Time/Temperature
2. Timer
3. Oscillation
4. Modes: Normal, Eco and Sleep
5. Speed: Low, medium and high
Keypad
1. Modes
2. Oscillation
3. On/off
4. Timer
5. Speed
6. CLEANING AND MAINTENANCE
Disconnect the appliance from the power supply and allow it to cool down before
cleaning.
Use a soft, damp cloth to clean the product's surface.
18
EN ERGYSILENC E 62 0 MAXFLOW SM A RT
Publicidad
