Erbe BiClamp 110 Manual De Instrucciones página 24

OBJ_DOKU-163748-011.fm Seite 24 Freitag, 4. September 2015 8:35 08
6
How to use
6.1 Only use sterile products
Clean, disinfect and sterilize these products before using them
for the first time and before every subsequent use.
6.2 Check the product
1. Check the product for damage, including the insulation or
coating.
If damaged, do not use this product!
6.3 Assembling the product
CAUTION! Never press the instrument jaws together by hand to
prevent damaging the instrument.
1. To close the instrument jaws, hold the insert on the joint
sleeve (1) and pull on the rod (2).
2. Slide the insert into the shaft tube.
3. Screw the insert onto the joint sleeve (2) as far is it goes.
24