smith&nephew Renasys Touch Manual De Servicio página 7

Device physical appearance check
Recommended personnel: Device physical appearance
check should be performed by a trained technician.
Equipment and materials required: None.
Note: Prior to proceeding with device inspection, verify
device has been cleaned and disinfected appropriately.
1.
not connected to AC mains power.
2. Visually inspect device for damage, cracks or
missing pieces.
3. Confirm device plastic housing is not cracked,
shattered or in deformed condition.
4. Rotate device 360° in vertical and horizontal planes.
Confirm device does not have loose components.
5. Confirm device touchscreen is not cracked,
shattered or in dismounted condition.
6. Confirm device push buttons (Power, Start/Pause
Therapy, and Lock/Unlock) are intact, physically
undamaged and symbols are legible.
7. Confirm device attachment knobs are intact.
8. Confirm device status indicator is not cracked,
shattered or in dismounted condition.
9. Confirm device external power indicator is not
cracked, shattered or in dismounted condition.
10. Confirm device power jack is not damaged.
11. Confirm device identification label is present. The
REF and SN numbers should be clearly visible.
12. Confirm inlet port is not damaged and device O-ring
is present.
13. Confirm bar code label is present and legible on
bottom of device.
14. Confirm power supply has no fraying or missing
insulation and plug is not bent, loose or missing.
15. Confirm power supply front and rear labels are
clearly visible and legible.
Smith & Nephew Medical Limited
101 Hessle Rd, Hull HU3 2BN England
Made in China
D
16. Confirm power cord has no fraying, missing
insulation, or any bent, loose or missing plug blades.
17. If RENASYS™ TOUCH IV pole/bed clamp (66801278)
is present:
• Visually inspect clamp for damage, cracks or
missing pieces.
• Confirm clamp label is present. The REF and LOT
numbers should be clearly visible and legible.
• Confirm the clamp clips open and close.
• Confirm clamp knob fully opens and closes the
arm.
• If any of the above checks for clamp fails, dispose
of clamp and acquire a new clamp from
Smith & Nephew as needed.
7