Usb - Fronius Primo 3.8-1 208-240 Manual De Instrucciones

Setting range
Status
communication
Inverter Number
linked together
Setting range
Factory setting
IMPORTANT! Each inverter must be assigned its own address when using multiple in-
verters in a data communications system.
Protocol type
Setting range
Factory setting
* The protocol type Interface Protocol only works without the Datamanager card. Avail-
able Datamanager cards must be removed from the inverter.

USB

Value settings when using a USB stick
Setting range
IMPORTANT! The time must be set correctly in order for the logging function to work prop-
erly.
Safely remove hardware
losing data.
-
-
Software update
Procedure:
IMPORTANT! To ensure problem-free updates of inverter software, the USB stick should
have no hidden partitions and no encryption (see section "Suitable USB Sticks).
28
Displays data communication available via Solar Net or an error that occurred in data
Number setting (address) of the inverter in a setup where multiple solar inverters are
Defines the communication protocol used to transmit data:
To remove a USB stick from the USB A socket on the data communication rack without
The USB stick can be removed:
when OK is displayed
when the "Data Transfer" LED is no longer flashing or illuminated
For updating inverter software using a USB stick.
Download the "froxxxxx.upd" update file
1
(e.g., at http://www.fronius-usa.com; xxxxx stands for the respective version num-
ber)
Status / Inverter number / Protocol type
00 – 99 (00 = 100 inverter)
01
Solar Net / Interface Protocol *
Solar Net
Safely remove hardware / software update / logging interval