Usb Stick For Updating Inverter Software; Removing The Usb Stick - Fronius Primo 3.8-1 208-240 Manual De Instrucciones

USB Stick for Up- The USB stick can be used to help end customers update inverter software via the USB
dating Inverter menu item in the SETUP menu item: the update file is first saved on the USB stick and then
Software transferred to the inverter. The update file must be saved in the USB stick root directory.
Removing the
Safety information for removing a USB stick
USB Stick
X
Do not disconnect
USB-Stick
while LED is flashing!
IMPORTANT! To prevent a loss of data,
the connected USB stick should only be
removed under the following conditions:
- via the SETUP and "Safely remove
USB / hardware" menu items
- when the "Data Transfer" LED is no
longer flashing or illuminated.
39