Motorola IMPRES 2 Guia Del Usuario página 10

• Monitors the IMPRES 2 or IMPRES battery usage pattern.
• Updates pattern information stored in the IMPRES 2 or IMPRES
battery.
• Automatically performs Calibration/Reconditioning only as needed.
• Minimizes IMPRES 2 or IMPRES battery heating, regardless of how
long the battery is left in the pocket.
• Periodically "tops off" a battery stored in the charger pocket,
maintaining a high state of readiness for the user.
• Eliminates Nickel battery memory effect, eliminating the need to
purchase special equipment or train personnel in tasks to maintain
battery cycle life.
Using this unique patented system, there is no need to track and
record IMPRES 2 or IMPRES battery use, conduct manual Calibration/
Reconditioning, or remove batteries from chargers following
completion of charge.
IMPRES 2 or IMPRES Battery Initialization
For full IMPRES 2 or IMPRES functionality, a new IMPRES 2 or
IMPRES battery must be initialized by the charger. The charger
automatically detects the new IMPRES 2 or IMPRES battery, and
automatically starts Initialization. Initialization is the first IMPRES
battery Calibration/Reconditioning of an IMPRES 2 or IMPRES battery.
This is a two-phase process. The first phase is Battery Discharge,
indicated by a Steady Amber LED. The second phase is full charge,
eventually indicated by a Steady Green LED. This process can take
up to 12 hours or more to complete, depending on the state of charge
and capacity of the battery. Interruption of either phase delays
Initialization until the next charging opportunity.
IMPRES 2 or IMPRES Pocket-to-Pocket
When charging IMPRES 2 or IMPRES batteries, the IMPRES 2 or
IMPRES charger records charging information within the battery
memory. If the IMPRES 2 or IMPRES battery is removed from one
IMPRES 2 or IMPRES charger pocket and, within 30 minutes, inserted
into another or the same IMPRES 2 or IMPRES charger pocket, then
charging resumes at the point where charging was interrupted. This
7