Motorola IMPRES 2 Guia Del Usuario página 16

Manually Terminating Calibration/Reconditioning
At any time during IMPRES 2 or IMPRES battery discharge (Steady
Amber), terminate Calibration/Reconditioning by performing the
following steps:
1. Remove the battery from the charger pocket.
2. Within 5 seconds, reinsert the battery into the charger pocket.
Battery discharge immediately terminates and normal battery charging
starts. The LED indicates Charge Status.
Charger Overview
Front View
2
1
8
9
10
Table 5: Charger Overview and Decription
No. Name
1–6 Charger Pockets
7 Communications Module
8 Pocket LED Status Indicator Charge Status LED (one per pocket)
9 Display
10 Keypad Display
11 AC Inlet Socket
3 4 5
7
Figure 1: Charger Overview
Each pocket accommodates a compatible radio or
stand-alone battery
In certain chargers, the Communications Module
also charges USB Accessories:
• EU/UK PS000029A03
• RK PS000029A08
Optional Display for pockets other than Pocket #1
Pocket #1 Display with Menu Keypad
Uses power cord specific to the country or region
6
Description
13
Rear View
11