Motorola IMPRES 2 Guia Del Usuario página 33

Preparation for Lithium-Ion Battery Shipment
You can prepare stand-alone IMPRES 2, IMPRES, or other authentic
Motorola Solutions Lithium-Ion batteries for shipment by air cargo
using an IMPRES 2 Multi-Unit Charger. Other battery types are faulted.
If the IMPRES 2 Lithium-Ion battery is equipped with a Sleep mode,
the charger puts the battery to sleep upon completion of Ship Lithium
charge.
Prepare only stand-alone Motorola Solutions Lithium-Ion batteries for
shipment. Remove the battery from the radio before placing it into the
charger.
DO NOT store a stand-alone battery in the charger. When preparation
for Lithium Shipment is complete, immediately remove the stand-alone
battery from the charger.
Selection of Lithium Shipment supersedes Calibration/Reconditioning.
IMPRES 2 or IMPRES Battery
Table 16: Status Indications of a Lithium-Ion Battery Prepared for
Shipment - IMPRES 2 or IMPRES Battery is due for Calibration
Status
Charger Powers On
Battery Detected
Battery Discharging
Rapid Charging
Ship Lithium Complete
Charger Display
Green for approximately
IMPRES 2
1 second
CHARGER
IMPRES 2
Battery requires Calibration:
BATTERY
Alternating Amber /
or
IMPRES
Green for 4 seconds
BATTERY
Steady Amber
SHIP LI DISCHRGE
xxx% Rated Cap
Steady Red
SHIP LI CHARGE
xxx% Rated Cap
Alternating Amber /
LI READY TO SHIP
Green
xxx% Rated Cap
30
LED Indicator