Motorola IMPRES 2 Guia Del Usuario página 36

Table 18: Status Indications of a Lithium-Ion Battery Prepared for
Shipment - IMPRES 2 or IMPRES Battery Calibrated, Must Discharge
Status
Charger Powers On
Battery Detected
Battery Discharging
Ship Lithium Complete
Fault
• Battery is not making
proper electrical contact
with the charger.
• Battery Unknown or
Nickel
• An unknown condition is
preventing the battery
from being discharged.
• Charging is completed
before the Ship Lithium
goal is reached.
• The charger pocket is a
special type.
Standby
• Battery is waiting to rapid
charge.
• Battery is too hot, too
cold, or low voltage.
• Charger is too hot.
Charger Display
Green for approximately
IMPRES 2
1 second
CHARGER
IMPRES 2
BATTERY
Steady Amber
or
IMPRES
BATTERY
Steady Amber
SHIP LI DISCHRGE
xxx% Rated Cap
Steady Green
LI READY TO SHIP
xxx% Rated Cap
WARNING:
NOT CHARGEABLE
REMOVE& REINSERT
OR
WRONG BATT TYPE
CANNOT SHIP LI
OR
CANNOT DISCHARGE
Flashing Red
FOR LI SHIPMENT
OR
SHIP INCOMPLETE
Low Capacity:yy%
OR
RADIO POCKET
CANNOT SHIP LI
OR
CHARGING POCKET
CANNOT SHIP LI
WARNING:
HOT BATTERY
WAITING TO CHRGE
OR
COLD BATTERY
Flashing Amber
WAITING TO CHRGE
OR
VERY LOW BATTERY
WAITING TO CHRGE
OR
HOT CHARGER
WAITING TO CHRGE
33
LED Indicator