Motorola IMPRES 2 Guia Del Usuario página 59

Table 22: xx% Long-Term Storage Enabled and the Battery Completed
Display Adjacent to Pocket
STORAGE SLEEP
xxx% Rated Cap
For example, the Charger State Message is not displayed if xx% Long-
Term Storage is enabled and the battery completed 75% Long-Term
Storage charge in a different charger.
Charger Reprogramming
Charger reprogramming requires the Communications Module
connected to a computer via a standard USB cable. Using the IMPRES
Battery Fleet Management System to initiate charger reprogramming,
the following messages are displayed by the charger.
Remove batteries from the charger pockets before reprogramming:
All charger pockets are empty:
Reprogramming data is downloading:
For chargers with a display associated with each pocket, the
percentage value is the percentage of data successfully downloaded
into the pocket associated with the display. For chargers that have only
one display (Pocket #1), the percentage value is the percentage of
data successfully downloaded into all pockets.
Reprogramming failed in the identified pocket:
xx% Long-Term Storage Charge
REPROGRAMMING
REMOVE BATTERIES
REPROGRAMMING
WAITING FOR DATA
REPROGRAMMING
Progress yyy%
REPROGRAMMING
POCKET#xx FAILED
56
Pocket #1 Displaying Another Pocket
xx STORAGE SLEEP
xxx% Rated Cap