System Requirements - Sony M-crew MDS-PC3 Manual De Instrucciones

System requirements

6 GB
The following hardware and software are necessary to use the M-crew
(ver. 2.0E) software.
s IBM PC/AT or compatible (This software does not run on the Apple
Macintosh.)
1
s CPU* :
s Video board and display driver:
s Hard disk space: 30 MB*
s USB port:
s OS:
s Media player:
s Video monitor:
1
* The operation of M-crew is not guaranteed on some computers with Pentium-
compatible CPU chips, such as the AMD K6 (e.g., sound skipping may occur
during playing of an audio file).
* 2 Another 20 MB of hard disk space is required to install LabelMaker 5.1.
3
* Be sure to log on through the administrator's account to install the software
and setup devices on a computer running Windows 2000 or Windows XP.
Notes
• The proper operation of M-crew is not guaranteed on some computers even if
they meet the requirements above.
• The proper operation of M-crew is not guaranteed on computers that you
constructed yourself or on computers with an operating system that you
upgraded yourself.
• Do not use a USB hub. If multiple USB devices are connected to the hub,
M-crew may not operate the system stereo component connected to the
computer properly.
• This software can be used only with an English-language operating system. If
used in a different language environment, it may not function properly or text
may not be correctly displayed.
Intel Pentium II 266 MHz/Celeron 333 MHz or
higher
SVGA (800 × 600 pixels), 65,536 colors or more.
2 or more
1 or more
Windows 98/Windows 98SE/Windows 2000*
Windows Me/Windows XP*
not run on Microsoft Windows 3.1, Windows 95
or Windows NT.)
Windows Media Player 6.4 or higher is required
in order to play music files on the computer.
SVGA (800 × 600 pixels), 65,536 colors or more.
3 /
3
(This software does