Publicidad
Idiomas disponibles
Idiomas disponibles
6. If you must cut across tree/branch, make 2 to 3 cuts,
1 in. apart and with a depth of 2 in.
7. Continue to cut more into the tree until the tree/
branch bends and the tension is released.
8. Cut the tree/branch from the opposite side of the
bend, after the tension is released.
To use the product in cold weather
CAUTION: Snow and cold weather can
cause operation problems. Risk of too low
engine temperature or ice on the air filter
and the carburetor.
1. In temperatures below 0°C/32°F, move the plug from
position 1 to position 2.
1
Introduction
WARNING: Read and understand the safety
chapter before you do maintenance on the
product.
987 - 003 - 30.01.2019
2
Maintenance
2. For temperatures below -5°C/23°F or in conditions
with snow, a winter cover is available. Assemble the
winter cover on the starter housing. The winter cover
decreases the flow of cool air and keeps snow away
from the carburetor space.
CAUTION: Remove the winter cover if the
temperature increases above -5°C/23°F. Put
the winter plug in in position 1 if the
temperature increases above 0°C/32°F. Risk
of too high engine temperature and damage
to the engine.
21
Publicidad
