Descargar Imprimir esta página

RedMax GZ4350 Manual Del Usuario página 35

Publicidad

Idiomas disponibles

Idiomas disponibles

Technical data
Engine
Cylinder displacement, cu.in/cm
Idle speed, rpm
Maximum engine power acc. to ISO 7293, kW/hp @ rpm
1
Ignition system
Spark plug
Electrode gap, in/mm
Fuel and lubrication system
Fuel tank capacity, US Pint/cm
Oil tank capacity, US Pint/cm
Type of oil pump
Weight
Weight, lb/kg
Saw chain/guide bar
Type of drive sprocket/number of teeth
Saw chain speed at 133% of maximum engine power
speed, ft/s / m/s.
Recommended cutting equipment
A specific chainsaw model has to be evaluated with the
cutting equipment to be recommended and fulfill the
requirements in ANSI B175.1-2012 (Internal Combustion
Engine-Powered Hand-Held Chainsaws - Safety and
Environmental Requirements) and Canadian Standards
CSA Z62.1-15 (Chainsaws) and CSA Z62.3-11 (R2016)
(Chainsaw kickback).
Chainsaw model RedMax GZ4350 met the safety
requirements in ANSI B175.1-2012 and Canadian
Standards Association CSA Z62.1-15 (Chainsaws) and
CSA Z62.3-11 (R2016) (Chainsaw kickback), when
equipped with the below listed saw chain and guide bar
combination(s).
1
Always use the recommended spark plug type! Use of the wrong spark plug can damage the piston/cylinder.
987 - 003 - 30.01.2019
Technical data
3
3
3
Accessories
RedMax GZ4350
2.63/43.1
2700
2.2/3.0 @ 9600
NGK CMR7H
0.026/0.65
0.89/420
0.57/270
Adjustable
9.9/4.5
Rim/7
80.7/24.6
Note: Other chainsaw models may not meet the
kickback requirements when equipped with the listed
guide bar and saw chain combinations.
We recommend only to use the listed guide bar and saw
chain combinations.
Low kickback saw chain
A saw chain that is designated as Low kickback saw
chain, meets the low kickback requirement specified in
ANSI B175.1-2012.
35

Publicidad

loading