Particular safety prescriptions
(obligation-prohibitions-danger)
are detailed in the specific chap-
ter concerning these issues.
Do not obstruct the heat extrac-
tion and/or dissipation openings.
The air drawn in for cooling
must have a temperature of
less than 40°C and must not
contain grease.
Do not leave flammable objects
or material near the appliance.
Do not use the equipment with
empty pots. Risk of burning.
stream the appliance whenever you
need to work in safe conditions.
Whenever it is necessary to oper-
ate inside the appliance (connec-
tions, commissioning, checking
operations, etc.) prepare for the neces-
sary operations (removal of panels,
elimination of supply) in compliance with
the safety conditions.
DUTIES AND QUALIFICATIONS
REQUIRED OF OPERATORS
Prohibition for the homogene-
ous operator to perform any
type of operation (maintenance
and/or other) without having first read
the entire documentation.
The information con-
tained in this document
is for the use of the qual-
ified technical operator who is author-
ised for: handling, installation and
maintenance of the appliance in
question.
The
structions have been
drawn up for the "Generic" operator
(Operator with limited responsibilities
and tasks). Person authorised and
employed to operate the appliance
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
GENERAL AND SAFETY INFORMATION
Disconnect all sup-
plies if present (e.g
gas - electrical) up-
operating
with guards active and capable of
performing routine maintenance (cle-
aning the appliance).
The operators who use the ap-
pliance must be trained in all as-
pects concerning its functioning
and safety features. They must there-
fore interact using appropriate meth-
ods and instruments, complying with
required safety standards.
The "Generic" operator must
operate on the appliance after
the technician has completed
installation
electrical, water, gas and drain con-
nections).
WORK AREAS
AND HAZARDOUS ZONES /
To better define the scope of interven-
tion and the relevant work zones, the
following classification is provided:
• Dangerous zone: any zone within
and/or in proximity to a machine in whi-
ch the presence of an exposed person
constitutes a risk in terms of the health
and safety of such a person;
• Exposed person: any person that
is found wholly or partly in a dange-
rous zone.
Maintain a minimum distance
from the appliance when oper-
ating in such a way as to avoid
endangering the safety of the operator
in case of unexpected circumstances
The following are also danger
zones / • All the work areas within
the appliance
• All the areas protected by appro-
priate safety and protection systems
such as safety photocell photoelec-
tric curtains, protective panels, inter-
locked doors, protective casing.
• All the zones within the control units,
electrical cabinets and junction boxes.
• All the zones around the appliance
in-
in operation when the minimum safe-
ty distances are not being respected.
EQUIPMENT REQUIRED
FOR INSTALLATION /
- 6 -
(transportation,
fixing
.