MBM IN74A Manual De Uso E Instalación página 37

DAILY DECOMMISSIONG / Upon
completion of the operations descri-
bed above: 1. Close the network locks
upstream the appliance (Water - Gas
- Electric). / 2. Make sure that the drain
cocks (if present) are "Closed".
3. Check the cleanliness and hygiene
of the appliance.
PROLONGED DECOMMISSIONING /
In case of prolonged inactivity, perform
all the procedures described for daily
putting out of service and protect the
parts most exposed to oxidation as in-
dicated below:
1. Use lukewarm water with a bit of
soap to clean the parts;
2. Rinse the parts thoroughly, without
using pressurised direct water or steam
cleaners jets for cleaning operations.
PLEASE CALL TECHNICAL AUTHORIZED SERVICE AND READ THE
TECHNICAL MANUAL
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
OPERATIONS FOR COMMISSIONING
3. Dry the surfaces carefully using
non-abrasive material;
4. Wipe a non-abrasive cloth lightly so-
aked with food-safe Vaseline oil over all
of the stainless steel surfaces in order
to create a protective film.
For appliances with doors and rubber
gaskets, leave the door slightly ajar to
let it air out and spread protective tal-
cum powder on the rubber gasket sur-
faces.
Periodically air the appliances and
rooms.
a year by an authorised technician of
the assistance service.
REPLACING COMPONENTS
- 13 -
To make sure that the appliance
is in perfect technical conditions,
arrange for service at least once
5.
EN
6.