Publicidad
Idiomas disponibles
Idiomas disponibles
English
CAUTION
There is a risk of damaging the pump/unit. 'Caution' implies that damage to
the product is likely if the information is disregarded.
NOTE:
Useful information on using the product. It draws attention to possible prob-
lems.
2. 2 Safety information for inspection and installation work
The safety information provided in the operating instructions for the
pump(s) must be observed for all work on interface converters and pump(s)
and the unit.
Risk of electric shock
Danger from electrical current must be eliminated.
Work on pump(s) and the unit may only be done when they are stationary,
switched off at the mains and with suitable tools.
3 Transport and interim storage
Check the product for damage in transit immediately on arrival. If damage is
found, the necessary procedure involving the forwarding agent must be taken
within the specified period.
CAUTION! The interface converter is susceptible to damage
Careless handling during transport and storage can cause damage.
• The AnaCon interface converter must be protected against moisture, frost
and mechanical damage during transport and interim storage.
• It must not be exposed to temperatures outside the range from - 10°C to
+ 70°C.
4 Intended use
The Wilo-Control AnaCon interface converter is used for the universal
connection of pumps that can communicate with the PLR interface on the
client's control and monitoring units with conventional input/output channels.
Pumps that can be connected:
1 pump (single or double)
16
WILO SE 04/2009
Publicidad
