Wilo Control AnaCon Instrucciones De Instalación Y Funcionamiento página 24

English
6. 2 Functions and operation of the interface converter/manual operation level
6.2.1 Signal lamps
"Stand-by Interface
converter"
signal lamp"
Fig. 1, item 1
"Pump communica-
tion" signal lamp
Fig. 1, item 2
"Pump fault"
signal lamp
Fig. 1, item 3
"Single-head pump or
double pump opera-
tion ma" signal lamp
(ma = Master)
Fig. 1, item 4
"Double pump opera-
tion sl"
signal lamp (sl = Slave)
Fig. 1, item 5
Tab. 3
20
AnaCon
LED lights up green continuously:
• 24 VDC supply voltage available.
LED is off:
• 24 VDC supply voltage not available.
LED is off:
• Pump has not logged on.
LED lights up green continuously:
• "Pump – Interface Converter" communication working
perfectly.
LED lights up red continuously:
• Communication problem between pump and interface
converter
LED is off:
• Pump not faulty.
LED lights up red continuously:
• Pump is faulty.
LED is off:
• Single-head pump or double pump ma stationary.
LED lights up green continuously:
• Single-head pump or double pump ma is operating.
LED is off:
• Double pump sl stationary.
LED lights up green continuously:
• Double pump sl is operating.
WILO SE 04/2009