Panasonic WV-CL934 Manual De Instrucciones página 44

15. Image stabilizer setting [STABILIZER]
"ON" or "OFF" is selected to decide whether or not to enable the image stabilizer.
This function is effective for the case that the camera is installed on a power pole or other
poles.
ON: Enables the image stabilizer.
OFF (default): Disables the image stabilizer.
Important:
• When "ON" is selected for the image stabilizer, the view angle becomes narrower and the
resolution becomes lower. When "ON" is selected for the image stabilizer, check the view
angle and resolution at camera installation.
• The image stabilizer function may not work for the following photographic subjects or con-
ditions:
• Dark photographic subject
• Less contrasty photographic subject (e.g. white wall)
• Short cycled image shaking such as mechanical vibration
• Large amplitude image shaking
44
All manuals and user guides at all-guides.com