Editing; Uniform Stitch Adjustment; Needle Drop Position - Kenmore 385.19606 Manual De Instrucciones

Editing
Uniform stitch adjustment (modes 2 and 3 only) [] _'_"4_° 2._,_
The stitch width and length of the programmed stitch patterns __ _--
can be uniformly altered. - 7.0 m_2.5
HODE 2
Example 1 :
To alter the stitch width of the programmed pattern #80 (mode 2) (_
and itsmirrorimage ...... ....
*Whenyouwishtoalterthestitchwidthorlengthafter
sewing the programmed patterns, you needto pressthe ....... .....................
edit key ...... ....
Stitch length will be uniformly altered when patte'ns ol
samecategory (satinstitchesorstretchstitches) have WIDTH
programmed.
[] Press the help key to shift
the
.........................
programmed pattern. _
[] Press the stitch widt_ _dju#ting k_ ::_ _!ter the
]
® Uniformly _i width
Needle drop .....
The needledrop patterns will v ary
depending on the combination:
(_) Drops to the left when combining the patterns that start with the
left needle position and the center needle position.
® Drops to the right when combining the patterns that start with
the right needle position and the center needle position.
® Drops to the center when combining the patterns that start with
the left needle position and the right needle position.
@ Drops to the center when combining the patterns that start
with the left, right and center needle positions.
@
_4
4 =
8
=
®
i
@ ©
d_Z_b
0=
124