Tabla de contenido
Publicidad
Zipper
Sewing
(_ Stitch pattern: #1 (mode 1)
(_ Thread tension dial: AUTO
(_ Foot: Zipper foot E
@
®
Attaching
the zipper
foot
To sew on the left side of the zipper, attach the foot
holder to the right pin on the zipper foot
To sew on the right side of the zipper, attach the foot
holder to the left pin on the zipper foot.
(_ Groove
® Pin
® To sew left side
(_ To sew right side
Fabric
preparation
Add 3t8" (lcm) to the zipper size. This is the overall
opening size.
(_ Right side of fabric
® Opening size
(_) Zipper size
(_ 3t8" (1 cm)
® End of opening
® Slider
(_ Zipper teeth
_) Zipper tape
Place right sides of fabric together and sew a bottom seam
3t4" (2 cm) from the fabric edge to the estimated zipper
bottom stop position
Sew in reverse a few stitches to lock.
Increase the stitch length to 5.0. set the needle thread
tension to 0, and baste the entire length of the zipper
opening.
® Bottom seam
Zipper bottom stop position
Reverse stitch
Basting stitch
3/4" (2 cm)
*
Starting
to sew
[] Attach the zipper foot on the right-hand side of the pin.
Fold back the upper layer seam allowance.
Fold back
the lower layer seam allowance to form a 118" (0.3 cm)
margin of the fabric. Place the zipper teeth next to
margin edge and pin margin to the zipper tape.
Return the stitch length and thread tension to the
original settings.
Lower the zipper foot so it aligns with the zipper teeth.
Sew from the bottom stop to the entire length of the
zipper tape, removing pins as you go.
(_ Upper layer
@ Lower layer
(_) 1t8" (2 cm) margin
(43Margin edge
® Bottom stop
® Zipper length
®
43
v/"( _
f
\
88
Publicidad
Tabla de contenido
