Winding The Bobbin; Removing The Bobbin; Horizontal Spool Pin; Additional Spool Pin - Kenmore 385.19606 Manual De Instrucciones

Winding the Bobbin
Removing the bobbin
Gently slide the hook cover plate release button to the
right and remove the cover plate.
Lift out the bobbin
<_ Hook cover plate release button
Hook cover plate
• Horizontal spool pin
Lift up the spool pin 3. Place the spoo of thread on
the spool pin with the thread coming off the spool as
shown, Attach the large spool holder 2_.and press it firmly
against the spool of thread
Spool pin
_2_Large spoo holder
The small spool holder _ is used with narrow or small
spools of thread.
_3_Small spool holder
If the thread jams around the spool pin. use the spool
stand _.
Spool stand
\
J
/
Additional spool pin
The additional spool pin is for bobbin winding, without
unthreading the machine, and for twin needle sewing.
Set the spool stand under the additional spool pin,
place the felt, then insert into the hole.
Additional spool pin
Felt
_3_ Additional spool pin hole
Bobbin winder spindle
_5_Spool stand
32