Problems And Warn Ng Signals - Kenmore 385.19606 Manual De Instrucciones

Problems and Warning Signals
If a signal sounds and the LCD screen shows a warning sign, follow the guidance below.
Warning Sign Try this
!I
I! St il 1
lockst, it.ch hTg
_ This
button can't I I
be used,
J l
0 This
button '
ca n t
be used°
@
This
button can't
be used,
K
Cause
The machine is started without lowering the
presser foot,
The machine will stop if the presser foot is
raised while sewing,
The machine will stop if the buttonhole is sewn
without lowering the buttonhole lever,
The twin needle Key is pressed when a pattern
unsuitable for twin needle sewing has been
selected.
The foot control is released while sewing a locking
stitch.
The elongation key is pressed when a pattern
that cannot be elongated has been selected
The memory key or mirror image key is
pressed when the patterns in mode 1 have
been selected.
The foot control is disconnected while sewing.
Lower the presser foot and
restart the machine.
Do not raise the presser foot
while sewing.
Lower the buttonhole lever
and restart the machine.
Sew with a single needle.
Depress the foot control
again to let the machine stop
automatically,
Elongation is applicable only
to satin stitches.
Select the equivalent patterns
from mode 2
Connect the foot control and
restart the machine.
150