WIKA A-10 Manual De Instrucciones página 11

8. Specifications
Specifications
psi abs.
inWC
inWC abs.
Max. measured error per IEC 61298-2
Measuring range ≥ 0.6 bar [≥ 8.7 psi]
Measuring range ≥ 0.4 bar [≥ 5.8 psi]
Measuring range ≥ 0.25 bar [≥ 3.6 psi]
Measuring range ≥ 0.16 bar [≥ 2.3 psi]
Measuring range ≥ 0.1 bar [≥ 1.45 psi]
Measuring range ≥ 0.05 bar [≥ 0.73 psi]
Temperature error at 0 ... 80 °C [32 ... 176 °F]
Typical
Maximum
Additional zero point error depending on the mounting position for measuring ranges ≤ 1 bar [15 psi]
Mounting position 180°, vertical,
top process connection
Mounting position 90°, horizontal
Vacuum resistance
WIKA operating instructions pressure transmitter, model A-10
Measuring ranges ≤ 5 psi abs.
Measuring ranges < 25 psi abs.
Measuring ranges ≥ 25 psi abs.
Measuring ranges ≤ 40 inWC
Measuring ranges ≤ 200 inWC
Measuring ranges ≤ 400 inWC
Measuring ranges ≤ 200 inWC abs.
Measuring ranges ≤ 400 inWC abs.
≤ ±1 % of span
≤ ±1.2 % of span
≤ ±1.3 % of span
≤ ±1.5 % of span
≤ ±1.8 % of span
≤ ±2.4 % of span
≤ ±1 % of span
≤ ±2.5 % of span
■
≤ ±1.5 % of span on request
■
≤ 1 mbar [≤ 0.015 psi]
≤ 0.6 mbar [≤ 0.009 psi]
Yes (restriction with measuring ranges ≤ 0.1 bar [≤ 1 psi, ≤ 40 inWC]: -0.2 bar [-3 psi,
-80 inWC])
14.5 psi abs.
45 psi abs.
2 times
80 inWC
400 inWC
1,200 inWC
400 inWC abs.
1,200 inWC abs.
≤ ±0.5 % of span
≤ ±0.7 % of span
≤ ±0.8 % of span
≤ ±1 % of span
-
-
EN
11