WIKA A-10 Manual De Instrucciones página 12

8. Specifications
Specifications
Output signal
Auxiliary power
EN
Current supply
Settling time per IEC 61298-2
Switch-on time
Pin assignment
Short-circuit resistance
Reverse polarity protection
Insulation voltage
Material (wetted)
Medium temperature limit
Ambient temperature limit
Storage temperature limit
Relative humidity
Max. permissible altitude
Pollution degree
Overvoltage category
Service life
< 300 ms with DNV approval and measuring range ≥ 0.4 bar [≥ 5.8 psi] ... ≤ 0.6 bar [≤ 8.7psi]
1)
12
→ See product label
→ See product label
→ See product label
Measuring range ≥ 0.4 bar [≥ 5.8 psi]
Measuring range < 0.4 bar [< 5.8 psi]
Measuring range ≥ 0.4 bar [≥ 5.8 psi]
Measuring range < 0.4 bar [< 5.8 psi]
→ See product label
S+ vs. U-
U+ vs. U-
No reverse polarity protection with ratiometric output signal
DC 500 V
< 10 bar [150 psi]
≥ 10 bar [150 psi]
≤ 25 bar abs. [400 psi abs.]
→ See order documentation or identification link per IEC 61406-1
→ See order documentation or identification link per IEC 61406-1
-40 ... +70 °C [-40 ... +158 °F]
45 ... 75 % relative humidity (non-condensing)
Above 2,000 m above sea level
2
I
Measuring range ≥ 600 bar [≥ 8,700 psi]
Measuring range > 0.1 bar [> 1.45 psi]
Measuring range ≤ 0.1 bar [≤ 1.45 psi]
WIKA operating instructions pressure transmitter, model A-10
< 1 ms
1)
< 1 min
< 15 ms
< 1 min
Stainless steel 316L
Stainless steel 316L and PH grade steel
Stainless steel 316L
10 million load cycles
100 million load cycles
10 million load cycles