Wilo -Flumen OPTI-TR 22 Instrucciones De Instalación Y Funcionamiento página 12

en-US
3.3 Use of lifting equipment
3.4 Storage
12
Transport and storage
If lifting equipment (lifting device, crane, chain hoist ...) is used, observe the following
points:
ƒ
Wear a safety helmet according to EN 397!
ƒ
Comply with local regulations on the use of lifting equipment.
ƒ
The technically correct use of the lifting equipment is the operator's responsibility!
ƒ
Lifting gear
–
Use legally specified and permitted lifting gear.
–
Select lifting gear based on the attachment point.
–
Attach lifting gear to the attachment point according to local regulations.
ƒ
Lifting equipment
–
Check it functions properly before use!
–
Sufficient bearing capacity.
–
Ensure stability during use.
ƒ
Lifting operation
–
Do not jam the product when lifting and lowering it.
–
Do not exceed the max. permissible bearing capacity!
–
If necessary (e.g. blocked view), assign a second person to coordinate.
–
No one should stand under suspended loads!
–
Do not move loads over workplaces where persons are present!
DANGER
Danger due to fluids which are hazardous to health!
Danger of bacterial infection!
• Disinfect the mixer after removal!
• Observe information from the work regulations!
WARNING
Risk of injury from sharp edges!
Sharp edges can form on the propeller blades. There is a danger of cutting injuries!
• Wear protective gloves!
WILO SE 2021-10