Descargar Imprimir esta página

Wilo -Flumen OPTI-TR 22 Instrucciones De Instalación Y Funcionamiento página 13

Ocultar thumbs Ver también para Wilo-Flumen OPTI-TR 22:

Publicidad

Idiomas disponibles

Idiomas disponibles

4
Application/Use
4.1
Intended use
4.2
Improper use
Installation and operating instructions Wilo-Flumen OPTI-TR 20-1, 22, 28-1, 30-1, 40-1, Wilo-Flumen EXCEL-TRE 20, 30, 40
Application/Use
CAUTION
Total damage due to moisture penetration
Moisture ingress in the connection cable damages the connection cable and the mixer!
Never immerse the end of the connection cable in a fluid and firmly seal it during storage.
ƒ
Securely position the mixer horizontally on a firm bearing surface.
ƒ
Secure the mixer against falling over and slipping!
ƒ
Do not set the mixer down on the propeller. In the case of larger propeller diameters, en-
sure an appropriate platform is provided.
CAUTION! Material damage! Propeller and shaft can be damaged!
ƒ
Store the mixer for a maximum of one year. Contact customer service before storing the
device for more than one year.
ƒ
Storage conditions:
Maximum: -15 to +60 °C (5 to 140 °F), max. humidity: 90 %, non-condensing.
Recommended: 5 to 25 °C (41 to 77 °F), relative humidity: 40 to 50 %.
Protect the mixer from direct exposure to sunlight. Extreme heat can cause damage!
ƒ
Do not store the mixer in rooms in which welding is carried out. The resulting gases or ra-
diation could corrode the elastomer parts and coatings.
ƒ
Protect connection cable against kinking and damage. Observe the bend radius!
ƒ
Turn the propeller at regular intervals (twice a year). This prevents jamming of the bear-
ings and it renews the film of lubrication on the mechanical seal. NOTICE! Wear protec-
tive gloves!
For suspension and homogenization in commercial areas of:
ƒ
Process sewage
ƒ
Sewage containing feces
ƒ
Wastewater (with small amounts of sand and grit)
Comply with the dimensioning based on the operator requirements! Any other use deviating
from this is regarded as non-compliant with the intended use.
The mixers must not be used in:
ƒ
Drinking water
ƒ
Non-Newtonian fluids
ƒ
Severely contaminated fluids containing hard components such as stone, wood, metals,
etc.
ƒ
Highly flammable and explosive fluids in pure form
en-US
13

Publicidad

loading