Yamaha Raptor 700 Manual Del Propietário página 310

NOTE:
The sponge material should be wet but not drip-
ping.
9. Pull the sponge material over its frame.
10. Install the air filter element by installing the
wing bolt.
11. Install the air filter case cover by hooking
the holders onto the filter case.
12. Install the seat.
NOTE:
The air filter element should be cleaned every
20-40 hours. It should be cleaned and lubricated
more often if the ATV is operated in extremely
dusty areas. Each time air filter element mainte-
nance is performed, check the air inlet to the air
filter case for obstructions. Check the air intake
duct between the air filter case and the throttle
body and the manifold fittings for an airtight seal.
Tighten all fittings securely to avoid the possibili-
ty of unfiltered air entering the engine.
8-61