Publicidad
4.
Complete the Installation
Caulk
Cup
Mastic
Récipient
Sellador
Copa
Lavatory
Install the faucet to the lavatory according to the faucet manufacturer's
instructions.
NOTICE: Risk of product damage. Siliconized acrylic caulk must be used to secure
the lavatory to the vanity. Do not use 100% silicone sealant, which will damage the
finish of the vanity.
NOTICE: Do not allow caulk to come in contact with the drawer slides and carriage.
Apply a thin, continuous bead of siliconized acrylic caulk around the entire top
edge of the vanity.
CAUTION: Risk of personal injury. The lavatory is very heavy. Get help lifting
the lavatory into place.
Center the lavatory from side-to-side on the vanity.
Wipe away excess caulk from the edges and any caulk that may have come into
contact with the drawer slides and carriage.
Allow the caulk to cure for at least eight hours.
Connect all plumbing and drain lines. Check for leaks.
Glass Shelf
Place four clear shelf cups into the lower rail tabs.
With the frosted side down, carefully place the glass shelf on the tabs of the lower
rails.
Terminer l'installation
lavabo
Installer le robinet sur le lavabo conformément aux instructions du fabricant du
robinet.
Kohler Co.
Glass Shelf
Étagère en verre
Estante de vidrio
11
1106935-2-B
Publicidad
