Publicidad
Care and Cleaning
For best results, keep the following in mind when caring for your KOHLER product:
Metal
• Use a mild detergent such as liquid dishwashing soap and warm water for
cleaning. Do not use abrasive cleaners that may scratch or dull the surface.
• Carefully read the cleaner product label to ensure the cleaner is safe for use on the
material.
• Always test your cleaning solution on an inconspicuous area before applying to
the entire surface.
• Do not allow cleaners to sit or soak on the surface.
• Wipe surfaces clean and rinse completely with water immediately after cleaner
application. Rinse and dry any overspray that lands on nearby surfaces.
• Use a soft, dampened sponge or cloth. Never use an abrasive material such as a
brush or scouring pad to clean surfaces.
Wood Surfaces
• As with any smooth surface, avoid using abrasive cleaners as they will scratch the
surface. Wipe the wood surface regularly to prevent buildup of soap and scum.
• To protect against scratches, use felt, leather, or cork under all items placed on the
wood surface. To conceal scratches, a touch-up marker is available for order.
Contact a Kohler distributor or call 1-800-4-KOHLER for ordering information.
• Do not expose wood furniture to direct sunlight, drying heat sources, or
dampness.
• Dust frequently with a soft cloth in the direction of the grain. Use only products
specifically made for cleaning wood. Avoid using oily polishes or waxes, or
products containing silicone. Blot spills immediately with a soft, damp cloth.
• Every six months, remove soil buildup by rubbing with a soft cloth dampened in
a 50/50 solution of warm water and an ammonia-free detergent. Wipe clean with
a cloth dampened in warm water, then wipe dry.
For detailed cleaning information and products to consider, visit www.kohler.com/clean.
To order Care & Cleaning information, call 1-800-456-4537.
Entretien et nettoyage
Pour obtenir les meilleurs résultats possibles, prendre ce qui suit en considération lors de
l'entretien de votre produit KOHLER:
Métal
• Utiliser un détergent doux tel que liquide pour vaisselle et de l'eau chaude pour
nettoyer. Ne pas utiliser de nettoyants abrasifs car ils pourraient rayer ou abîmer
la surface.
• Lire l'étiquette du produit de nettoyage avec le plus grand soin pour assurer qu'il
peut être utilisé sans danger sur le matériau.
• Toujours tester la solution de nettoyage sur une surface non visible avant de
l'appliquer sur l'ensemble de la surface.
• Ne pas laisser les nettoyants reposer ou tremper sur la surface.
• Essuyer les surfaces et rincer complètement avec de l'eau immédiatement après
l'application du nettoyant. Rincer et sécher tout éclaboussement sur les surfaces
avoisinantes.
Kohler Co.
15
1106935-2-B
Publicidad
