Publicidad
Ensamble el tocador (cont.)
Alinee e inserte las varillas roscadas, las espigas de madera y los conectores de
esquina en el marco izquierdo sobre el montaje inferior y los rieles.
3.
Secure the Vanity
Secure/Sécuriser/Fije
Cams/Cames/Levas
Leveler
Vérin de mise
à niveau
Nivelador
Leg/Pied/Pata
Secure
Insert four cams into the front rail, four cams into the back rail, and six cams into
the drawer assembly.
Using a Phillips screwdriver, turn the cam locks one quarter turn clockwise.
Position and Level
With assistance, lift and place the vanity in position against the finished wall. Do
not drag the vanity into position.
Verify the vanity is level and the back rail is plumb against the wall. If necessary,
turn the leveler(s) to adjust the unit.
Using a 1/4" drill bit, drill two pilot holes through the back rail and the finished
wall. Verify the pilot holes are positioned to ensure the lag bolts will engage the
2x6 backing material.
Kohler Co.
Position/Positionner/Coloque
Cams
Cames
Levas
9
1106935-2-B
Publicidad
