Singer 9940 Manual De Instrucciones página 80

C.SHIFTING THE CURSOR
When you select a few patterns, the cursor is
indicated on the right side of selected patterns.
At this condition, you can add patterns to the end
of the string of selected patterns.
Press the cursor left button and cursor will shift to
the left. The cursor position will be highlighted.
By pressing the cursor left or right button, cursor
wil shift left or right.
The cursor is used to check selected patterns.
delete pattern, insert patterns or change setting of
each pattern as described below.
D.TO CHECK SELECTED PATTERNS
As the length of the string increases, patterns will
disappear from sight.
You can check patterns by shifting cursor to the
left.
E. INSERTING PATTERN
1. Set the machine to stitch selection mode.
2. Shift the cursor to next pattern you want to
insert,
3. Select the pattern.
Machine will insert pattern just before the
highlighted letter or pattern.
F. TO DELETE PATTERN
1. Set the machine to setting mode.
2. Shift the cursor to the pattern you want to
delete.
3. Press the delete button (most right function
button)
Machine will delete the pattern and cursor will
shift to next pattern.
When the cursor is at furthest right side,
machine will delete just before pattern.
8O