Singer 9940 Manual De Instrucciones página 84

H.TWIN NEEDLE SETTING
At setting mode, press the function button directly
under the twin needle mark.
The mark will change as H-2 and the stitch width
will be reduced automatically.
H-1 Regular stitch
H-2 Twin needle stitch
When you change the twin needle setting,
machine will remain until you turn offthe machine.
See page 76 for twin needle sewing.
i. SINGLE / REPEAT SEWING
At setting mode, pressing the function button
directly under the single/repeat mark will change
single sewing and repeat sewing alternately.
I-1. Single sewing: Machine will stop automatically
after sewing selected patterns.
I-2. Repeat sewing: Machine will sew selected
patterns repeatedly until you stop the machine.
NOTE:
If you change single/repeat mode during the
sewing of last selected pattern,
* From Single mode to Repeat mode:
Machine will sew one single pattern, (stop
automatically) and change to repeat mode.
* From Repeat mode to Single mode:
Machine will repeat sewing patterns once more
and stop automatically (then change to single
mode).
J.SEWING THE SELECTED PATTERN
1. Attach the satin foot when sewing decorative &
letter stitch,
2. Lower the presser foot and start sewing.
3. Machine will indicate the sewing pattern on the
LCD.
K.TIPS
a. To sew selected patterns from
beginning.
When you stop sewing at the middle of
patterns, you may want to restart selected
patterns.
In such case, press the decorative & letter stitch
button.
b. To recall the selected pattern.
If you change the pattern to utility stitch,
machine will retain the selected patterns.
To recall these patterns, press the decorative &
letter stitch button, change the mode to setting
mode and press the setting button. Machine will
recall the selected patterns.
.... i_i_%_i:iii_i:iii_i:iii_i:iii_i:iii_i:iii_i:iii_i:iii_i:iii_i:iii_i:iii_i:iii_i:iii_i:iii_i:iii_i:iii_i:iii_
12345_
H-1 _) H-2[_
...... 2
_Jiii _iiiiiil i
ABC
r__ I
A B C © E I_
O3 O3
O O
>
o3
O
84