Dacor DTT48 960 Serie Manual Del Usuario página 30

Using the Rangetop
Using the Smart Connect feature
The rangetop has a built-in Wi-Fi module that you can use to sync the rangetop with the
SmartThings app. This app lets you:
• Monitor the On/Off status of the rangetop elements.
The SmartThings app may not work properly if Wi-Fi communications are not working
(e.g., blocked by other electronic appliances or outside electrical interference) or if the
rangetop is installed where the signal is weak (e.g., far from the Wi-Fi source).
Connecting the rangetop
Before you can remotely control your rangetop, you must pair it with the SmartThings
app.
1. Download and open the SmartThings App on your smart device.
2. Follow the app's on-screen instructions, then press-hold the Smart Connect button for
3 seconds.
NOTE
• The Smart Connect LED indicator stops blinking but remains on, indicating the
connection was successful.
• If the Smart Connect LED does not appear, follow the app's instructions to reconnect
with the rangetop.
30 English
FULL_RANGE TOP_DTT48T960GS_DG68-01474A-01_EN+MES+CFR.indb 30 FULL_RANGE TOP_DTT48T960GS_DG68-01474A-01_EN+MES+CFR.indb 30 2023-04-25 오후 6:03:38 2023-04-25 오후 6:03:38